BADUJET SWIM JET SYSTEMS — Convert
your smaller pool into a lap pool. Suction and
discharge housed in the patented one piece
nozzle housing. Volume control and on/off
button located on face of jet housing. Includes:
dual nozzle jet housing, massage hose, 4 HP
pump, control box with GFCI. Specify: round
cover or rectangular cover. Specify voltage.
BADUJET SWIM JET SYSTEMS — Convert
your smaller pool into a lap pool. Suction and
discharge housed in the patented one piece
nozzle housing. Volume control and on/off
button located on face of jet housing. Includes:
dual nozzle jet housing, massage hose, 4 HP
pump, control box with GFCI. Specify: round
cover or rectangular cover. Specify voltage.
BADUSTREAM SWIM JET SYSTEMS —
Over-the-wall water treadmill for existing pools.
One piece polyethylene body houses pump,
adjustable water flow jet nozzle, and air
regulator controls. Unit includes 4 HP pump
and deck mounting hardware. Massage hose
ordered separately. Specify voltage.
BADUSTREAM SWIM JET SYSTEMS —
Over-the-wall water treadmill for existing pools.
One piece polyethylene body houses pump,
adjustable water flow jet nozzle, and air
regulator controls. Unit includes 4 HP pump
and deck mounting hardware. Massage hose
ordered separately. Specify voltage.
Speck model 95 pump, 7 1/2 HP, 208-230/460V, 3 phase
Item: 13-485 Price: $2,171.75
SPECK MODEL 95 PUMP, 7 1/2 HP, 208-230/460V, 3 PHASE — The Speck Model 95 is designed with the largest one piece plastic casing and integrated strainer basket, easy on/off two-piece lid, and 4" quick disconnect unions. These features combined with unique mechanical seal results in a medium head pump with the "highest flow" of any one piece plastic pump. This pump is ideally suited for high-rate sand filter applications as well as water features. Speck's high quality continues in the Model 95 with positive advances to benefit the consumer and the environment.
Features •Largest, one-piece housing design with integrated strainer basket and easy on/off two-piece lid. •Quiet and efficient medium head pump performance. •This high performance pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour. •The pump can be used for pool water with a salt concentration of up to 5000 ppm. (For a higher concentration please call) •Suction and discharge are equipped with 4" quick disconnect unions for easy installation and maintenance. •Wrench for unions and lid is included with each pump. •Flanges are available upon request. •Heavy duty energy efficient totally enclosed fan cooled (TEFC) motor. Specially design to work with the Speck VFD Drive. •Motor is easy to remove without disturbing the plumbing. Reusable o-rings throughout. •Three/Two year warranty on all parts including normal wear of the mechanical seal. Motors also carries a two year warranty. •Every pump is performance tested before leaving the Speck factory.
SPECK MODEL 95 PUMP, 5 HP, 208-230V, 1 PHASE — The Speck Model 95 is designed with the largest one piece plastic casing and integrated strainer basket, easy on/off two-piece lid, and 4" quick disconnect unions. These features combined with unique mechanical seal results in a medium head pump with the "highest flow" of any one piece plastic pump. This pump is ideally suited for high-rate sand filter applications as well as water features. Speck's high quality continues in the Model 95 with positive advances to benefit the consumer and the environment.
Features •Largest, one-piece housing design with integrated strainer basket and easy on/off two-piece lid. •Quiet and efficient medium head pump performance. •This high performance pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour. •The pump can be used for pool water with a salt concentration of up to 5000 ppm. (For a higher concentration please call) •Suction and discharge are equipped with 4" quick disconnect unions for easy installation and maintenance. •Wrench for unions and lid is included with each pump. •Flanges are available upon request. •Heavy duty energy efficient totally enclosed fan cooled (TEFC) motor. Specially design to work with the Speck VFD Drive. •Motor is easy to remove without disturbing the plumbing. Reusable o-rings throughout. •Three/Two year warranty on all parts including normal wear of the mechanical seal. Motors also carries a two year warranty. •Every pump is performance tested before leaving the Speck factory.
SPECK MODEL 95 PUMP, 5 HP, 208-230/460V, 3 PHASE — The Speck Model 95 is designed with the largest one piece plastic casing and integrated strainer basket, easy on/off two-piece lid, and 4" quick disconnect unions. These features combined with unique mechanical seal results in a medium head pump with the "highest flow" of any one piece plastic pump. This pump is ideally suited for high-rate sand filter applications as well as water features. Speck's high quality continues in the Model 95 with positive advances to benefit the consumer and the environment.
Features •Largest, one-piece housing design with integrated strainer basket and easy on/off two-piece lid. •Quiet and efficient medium head pump performance. •This high performance pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour. •The pump can be used for pool water with a salt concentration of up to 5000 ppm. (For a higher concentration please call) •Suction and discharge are equipped with 4" quick disconnect unions for easy installation and maintenance. •Wrench for unions and lid is included with each pump. •Flanges are available upon request. •Heavy duty energy efficient totally enclosed fan cooled (TEFC) motor. Specially design to work with the Speck VFD Drive. •Motor is easy to remove without disturbing the plumbing. Reusable o-rings throughout. •Three/Two year warranty on all parts including normal wear of the mechanical seal. Motors also carries a two year warranty. •Every pump is performance tested before leaving the Speck factory.
SPECK 433 2HP PUMP — This high performance, high head pump comes complete with a unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour. The pump can be used for pool water with a salt concentration of up to 5000 ppm. Pump parts are made of 100% recyclable plastic. Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 175 degrees F. Suction and discharge are reinforced with aluminum rings. Specially constructed clear lid with ring lock design is easy to open. Large strainer basket is always locked in place. For pool users' safety, the impeller has a dielectric shaft sleeve that provides absolute separation between pool water and electric parts. Flooded suction models available. Heavy duty "1081" pool motor with large 56 frame is thermally protected, has a PSC switchless design and extra large sealed ball bearings. Available with E-plus/extreme-E energy efficient motors for extra low energy consumption. Motor is easy to remove without disturbing the plumbing. Reusable o-rings throughout. Three/Two year warranty on all parts, including normal wear of the mechanical seal. All single and 2 speed motors also carry a two year warranty. Every pump is performance tested before leaving the Speck factory.
SPECK 433 11/2HP PUMP — This high performance, high head pump comes complete with a unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour. The pump can be used for pool water with a salt concentration of up to 5000 ppm. Pump parts are made of 100% recyclable plastic. Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 175 degrees F. Suction and discharge are reinforced with aluminum rings. Specially constructed clear lid with ring lock design is easy to open. Large strainer basket is always locked in place. For pool users' safety, the impeller has a dielectric shaft sleeve that provides absolute separation between pool water and electric parts. Flooded suction models available. Heavy duty "1081" pool motor with large 56 frame is thermally protected, has a PSC switchless design and extra large sealed ball bearings. Available with E-plus/extreme-E energy efficient motors for extra low energy consumption. Motor is easy to remove without disturbing the plumbing. Reusable o-rings throughout. Three/Two year warranty on all parts, including normal wear of the mechanical seal. All single and 2 speed motors also carry a two year warranty. Every pump is performance tested before leaving the Speck factory.
SPECK 433 1HP PUMP — This high performance, high head pump comes complete with a unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour. The pump can be used for pool water with a salt concentration of up to 5000 ppm. Pump parts are made of 100% recyclable plastic. Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 175 degrees F. Suction and discharge are reinforced with aluminum rings. Specially constructed clear lid with ring lock design is easy to open. Large strainer basket is always locked in place. For pool users' safety, the impeller has a dielectric shaft sleeve that provides absolute separation between pool water and electric parts. Flooded suction models available. Heavy duty "1081" pool motor with large 56 frame is thermally protected, has a PSC switchless design and extra large sealed ball bearings. Available with E-plus/extreme-E energy efficient motors for extra low energy consumption. Motor is easy to remove without disturbing the plumbing. Reusable o-rings throughout. Three/Two year warranty on all parts, including normal wear of the mechanical seal. All single and 2 speed motors also carry a two year warranty. Every pump is performance tested before leaving the Speck factory.
